A lot of great content is accessible via the Internet, from sources like YouTube, Netflix, iTunes, and others. But will your old antenna work with modern, digital TV? In our case, the antenna was a large, s multi-directional behemoth that was hanging in our attic, unused for decades. However, my dad remembered it working quite well for analog TV, before cable was available in our area, so we decided it was worth the risk to try wiring it back up. For TV wiring, it converts old ohm twin-lead wire to new ohm coaxial wire. If you have existing twin-lead wiring in good condition run to your TV, you can just use a balun where the twin-lead ends and a short length of coax to connect it to the TV.
How to Connect a Projector to a DVD Player
Dipoles work OK when the signal is adequate, but when multipath is stronger than the direct signal AND the tuner has inadequate alternate channel selectivity, it’s time to forget about clear reception and that’s what I have here- as I wrote, I’m very close to an antenna farm and that’s not good for someone who likes to listen to a college station that’s weaker than all of the others. Here’s a photo of the kind I’m referring to.
It’s possible that some are two wires, but many aren’t and I have seen several that had been cut. There are lots of good vintage FM tuners on eBay. However I do note your Public radio service is very limited compared to what we enjoy. That pretty much has you covered.
HD Projector vs TV – How to Set Up & Install a Home Theater System. By Jason Steele Posted in: Entertainment, you will need a digital television tuner connected to an antenna. Finally, You will need a video cord, ideally an HDMI cable, to connect the projector to your source. You will also need an audio cable to connect your source to.
I also build Flight and Golf simulators, 3 screen gaming platforms, Video Menus, Video walls, digital decoration and interactive projector games for kids. I’ve been putting big screens in homes and workplaces for last 7 years and have easily set up over a thousand theaters in the tri state area. All the pictures above are my equipment and installations. Thanks for checking out my ad. If you are looking for anything to do with projectors, I am sure i can give you a great deal on an indoor or outdoor setup, HD screen, stereo or accessories.
Best deals are for packages and specials for cash pick up at my house in Bensalem PA i am about 2 minutes away from Parx casino Racetrack. I’ve set up my garage as show room so you can checkout setup before you buy. Once a week we willeet you on an exit of the turnpike or Parkway. We also have an overnight and next day delivery service available.
Share on Facebook Optoma manufactures a range of projectors for presentation purposes, ranging from ultraportable models for laptop users to large, high-definition models intended for permanent installation in your boardroom or sales facility. In some cases, it might be convenient to connect your projector directly to a television. Projector to TV Step 1 Position the projector on a suitably stable surface, near a power outlet or power bar and close to the TV and video sources you wish to connect.
4 Hook Up an Optima Projector to a Television Some projectors are designed specifically with HDTV in mind, the most elaborate being home or office theater projectors.
Intel also make a Sandybridge cpu but while it will be more ‘future-proof’ due to the motherboard socket it is not as good value for money currently Most of the big review sites have gaming benchmarks that compare a number of different models of graphics card or cpu. Upgrading the existing machine can be done, but a new machine would be better, long term.
It depends on your budget, what games you want to play and how important ‘eye candy’ is to you. Some gaming graphics cards are too long for standard cases. There’s more to it than GHz though, and AMD has dropped the ball in respect to gaming since the two processors above even the trailed a bit behind Intel when released. It’s not a huge deal, but Intel still is the better cpu for gaming.
I say this as a long time AMD user who has recently made the move to Intel. My ‘old’ machine with a PhenomII and Nvidia GTX ti will still play most games at max settings, but as time moves on the newer big titles will leave it further behind won’t bother the wife though. That includes the approx 1. There are some uses for 16 or more GB RAM, mostly professional, but not gaming or watching video Professional level video editing, yes.
Power Supplies is another topic, but sufficice it to say that too many gamers get cheap and nasty psu’s. They use cheap capacitors and coils which don’t last and don’t produce smooth power delivery.
How to Play a TV Through a Projector
But I get many questions about how to connect a Blu-ray player for optimum performance, so I thought I’d spell it out here. Don’t be intimidated by the diagram above; it shows lots of possible connections between lots of home-theater devices. You won’t even hear surround sound, only 2-channel audio from the TV’s typically lousy internal speakers.
Dec 26, · I want to hook an off the air HD antenna up to an HD p projector. What is the best way to do this? I want to keep the cost as low as possible without sacrificing p HD quality. The antenna has an RF connector. The projector has HDMI inputs, as well as component and vga : Resolved.
You can use a flat screen TV. You can use a movie projector and movie screen. Basically anything you want to use to view either TV or a movie or sports programming. This is a stereo amplifier which you can connect your speakers and subwoofer. The Home Theater in a box is a complete surround sound system in one box. In this case, the price will directly relate to the quality of the system. The less you pay the lower the sound quality and the reverse of that is maybe all you want is some background sound all around you.
But, if you are looking for a solid sound quality plan to pay money for it. Onkyo has a real nice complete package minus the speaker wire for a reasonable price. The last option is the sound bar. A sound bar works by projecting the sound out into a room to create the allusion of sound from all sides. Nor do you need extra speakers if you have a Sound Bar.
Best way to hook up to projector
Most set top boxes offer a number of different connection options. The change from analogue to digital TV transmission means a dramatic increase in the number of set-top boxes. Here is what to look for and how to install it. Get a good set top box The first step in changing over to digital TV is to buy a good-quality set-top box — something that has all the outputs you can imagine.
Go for something with the following: Try to use a set-top box that has all outputs working simultaneously.
Aug 01, · Just hook up to one of the HDMI inputs on the Onkyo and hook the projector to the output. If it’s an older Onkyo receiver (like circa or so) .
If you’ve recently joined the ever-growing ranks of the cable cutters , you’re far from alone. More and more people myself included are getting fed up with service providers’ outdated subscription models and absurd pricing—and canceling their service. There are more legal alternatives than ever, and if you’re willing to wait a little longer to catch up on your favorite shows, you can save a ton of money. There are plenty of antennas you can buy to help boost your signal strength, but few of them are as effective as the Gray-Hoverman antenna.
Invented and first patented by engineer Doyt R. Hoverman in , the device is called a “super antenna” because it greatly increases the range and number of channels you can pick up. Users are commonly able to tune in to stations broadcasting miles away, and sometimes more. Both of the two patents on the device have since expired, making it easier than ever to build your own at home. There are a number of tutorials using different materials, but one of the simplest comes from tech blogger John Biggs , using foam core board and copper tape for a light, inexpensive antenna that can be mounted indoors.
Connect Projector to Windows Desktop or Laptop
Dan Andersen Not directly. I AirPlay recordings or live TV —in original form, i. Totally reliable, original broadcast quality, and works like a charm.
How to Hook Up HDMI Cable Television to a Projector Share on Facebook While your Epson projector is an integral part of your office presentations, it is also capable of .
The lightweight and portable LG Minibeam LED Projector PH can project television shows thanks to its built-in TV tuner, has a wealth of connection choices, and boasts very good video and data image quality. On the outside, the PH is slightly bulkier than standard mini projectors with dimensions of 6. Throughout its body, the LG includes a deep bench of port options. Along with standards like HDMI input and support for USB storage and composite video, the PH touts Bluetooth audio output and even a coaxial connector, meaning that you can hook up an antenna for over-the-air broadcast television.
The versatility of the projector is also well supplemented with the LG’s full-sized remote. Unlike most mini portable projectors, which feature equally small-scale remotes, the LG’s remote is virtually identical to the ones used on home televisions. As a result, it’s far easier to scroll through menus and adjust image settings without having to manually click through individual prompts with the projector’s manual controls.
The lack of microSD support is the only major downside to the LG’s connectivity options. Considering how common the format is for devices like digital cameras, it’s a baffling omission and a nuisance if you want to share content like home videos or photos through the mini projector.
How to Connect a Blu
How do i hook up my mac to a projector Posted in girl onPosted on by admin In any case, my husband an artist music and pic wise he also a gamer he used it how do i hook up my mac to a projector few time and enjoys it alot. Monitor cable and power cord. Or smartphone without plugging into the projector, so you can move freely about the room.
Just watch this video tutorial to learn how to connect an antenna or cable to your HDTV, For Dummies. Connecting an antenna or cable to your HDTV is a step-by-step process. Whether your HD television is LCD or plasma, hooking up cable or an antenna is easier with this tutorial’s instructions.
Analog televisions that do not receive DTV digital signals will not pick up most over-the-air channels without a digital converter box DTV converter box , which receives over-the-air DTV digital signals and converts them into analog signals that can be shown on analog TVs. Converter boxes are easy to set up and relatively inexpensive, but they do require a separate antenna. They may also provide noticeably better picture quality, as well as additional channels.
Steps 1 Set the converter box next to the television in an unobstructed area. The converter box must be near the television as it will be connected to your television with an included cable or cables. The converter box will also be operated by an included remote control, so it must not be behind an object that will block the remote control signal.
Additionally, the converter box must be plugged in, so must be near a power outlet or power strip. Read the labeled connections on the back of the converter box so you know where to connect the TV and antenna. If using a power strip, also turn it off. If you have an older antenna that will not connect directly to an RF coaxial connector, see the section for older TVs at the bottom of the Steps section.
Any free-standing antenna can be used, but it is recommended that an antenna that is designed to pick up DTV signals be used for optimal reception. Inexpensive rabbit ears as well as more powerful wall-mounted and outdoor antennas are readily available.